This Is A Custom Widget

This Sliding Bar can be switched on or off in theme options, and can take any widget you throw at it or even fill it with your custom HTML Code. Its perfect for grabbing the attention of your viewers. Choose between 1, 2, 3 or 4 columns, set the background color, widget divider color, activate transparency, a top border or fully disable it on desktop and mobile.

Just like the other one…

There are 6 SlidingBar Widget Options.

Bedside Table Lamps

I’m finally taking steps to overhaul some rooms in my home, beginning with a few furniture updates. First, the master bedroom.

I was blessed to have the opportunity to both design and oversee the construction of my home back in the early 80’s, and have been well content until lately knowing certain areas just need a good updating. Unlike some, I have never been one to repaint or move furniture around just for the fun of it. It’s not that I don’t like change, I was just comfortable with the design and furniture. Then I went and bought a new living room set, and got the redecorating bug.

So stepping out, I begin with table lamps for the master bedroom. Here is a before shot. It started out what I like to call pea green. Not a bad color, but the master bedroom has blues in it, and the green just wouldn’t blend in.

Table Lamp

I almost didn’t get a before shot because I was so excited to get started. First, I painted with two coats of Annie Sloan Aubusson Blue.

Aubusson Blue A shot after both had dried (almost).

Aubusson Blue - Dry

Then came the decision of what to do next.  I chose Annie Sloan Louis Blue, but did not give complete coats … almost hit and miss. Sorry if the pictures are a little too bright, I’m still learning the photography end of blog writing.

IMG_0275

Then I added Annie Sloan Old White and distressed.

IMG_0294

IMG_0277

IMG_0295

Here’s a shot right after waxing and ready for their new shades.

Hit n Miss

IMG_0311

IMG_0310

And a couple of the finished product.

IMG_0322

Night Table Lamp

Thanks so much for dropping by.  Until next time, I am

Ms. B.

By |March 13th, 2015|Home Decor|0 Comments

Meet Clarabelle

Welcome to the creation of Clarabelle.

Using Metal Effects Paint by Modern Masters, this is how she came to be …

First, I primed with Metal Effects Primer and let completely dry, then primed again (per the directions).

IMG_0064

IMG_0061

Although I liked her this way, I wanted to continue with the entire patina process, so I painted a mix of both Copper and Bronze Reactive Metalic Paint and let dry.

IMG_0076

IMG_0071

Then another coat.

IMG_0069

IMG_0067

Before the second coat had completely dried, I sprayed with both Green and Blue Patina Aging Solution, and watched the magic begin.

IMG_0089

IMG_0087

Before she was completely dry, I took a wet sponge and blotted certain areas that I didn’t want completely patinaed. And more magic occured during the final drying stage.

IMG_0091

IMG_0092

IMG_0093

And a finally dried Clarabelle.

IMG_0094

Clarabelle without her necklace I made a little later.

IMG_0142

And with …

IMG_0158

IMG_0157

Clarabelle

I barely had her finished before she sold to a good home.

Thanks so much for dropping by.  Until next time, I am

Ms. B

By |February 27th, 2015|Tutorial|0 Comments

Updated Harp Chair

If you didn’t read about my harp chair project, click here to get caught up.

After a few weeks, I decided that the chair really needed a new seat.  I liked the gray, but boy was it hard on the hinny.  So I went to Hobby Lobby and purchased new batting, foam padding, and material (used a 40% off phone coupon).

I didn’t take any pictures of the upholstery job … mainly because I was doing it at night and the lighting was poor.  But the couple I did take are below.

07-20141016_080005

02-IMG_0168

03-IMG_0169

Updated Harp Chair

Thanks so much for dropping by.  Until next time, I am

Ms. B

 

By |February 25th, 2015|Furniture|0 Comments

Bessie’s Necklace

Its been very chilly in the shop lately, so in order to continue crafting, I had to use my old standby, the kitchen table.  I’d really like to redo her, but that’s going to have to wait for a bit yet.  Anyhow, here we go.  I made a trip to Hobby Lobby and purchased 8 Boxwood Bushes which were 50% off that day (yeah me).

Boxwood Bush

When I got around to working on the wreath, the first thing I did was to cut each stem off the bush and get that out of the way.

Boxwood Bush

Next, I bunched them up to the top, and cut a couple of inches off each one.

Bunched Boxwood

Cut Stems

After a couple of the bushes were completed, I had a brain-storm.  Why not just bunch each individual stem up to the top, THEN cut it to the appropriate size? Imagine that?  Looks the same to me, and sure does save on the old hands having to cut the stems twice.

Cut Boxwood

Now for the fun part of designing.

 

A few different poses while I worked around the wreath

And the finished necklace.  It took me about an hour to get the stems ready for the wreath, and about the same time to fill in and finish the wreath.

Boxwood Wreath

Smokey decided he wanted to get in on the fun as well.

Smokey

And the finished wreath on Bessie.

Bessie

What do you think?

Thanks so much for dropping by.  Until next time, I am

Ms. B.

 

By |February 9th, 2015|Tutorial|0 Comments

Subscribe For Latest Updates

Signup for our newsletter and get notified when we publish new articles for free!